Add Instant Casual Elegance To Any RoomMy Living room

Here’s a secret Board and Batten hack that will make your home look more expensive!  And, you can do it yourself, it’s super low cost, but brings a super high end look to any room!

So what the heck is board and Batten, you ask?  Back in the day, in the old cottages , when old plaster walls started to show their age, people would take a piece of board and nail it over the cracks to hide the imperfections. To hide the unsightly seams created from butting the pieces together they used a batten, a vertical thin strip of wood. Once painted it became paneling. This quick fix technique has now evolved  into a creative decoration for the home, nodding to, and taking it’s cues from the Arts and Crafts movement. Board and batten is wainscoting/paneling that is reminiscent of Arts and Craft style aka Mission or Craftsman style because of its simple lines and casual elegance.

arts and crafts Breakfast Room 1916 Photo by William Wright
Arts and Crafts Breakfast Room 1916
Photo by William Wright
Article from artsandcraftshomes.com Read it
Board and Batten in 1915 arts and craft -bungalo-Photo-by-Dan-Mayers
Arts and Craft 1915 Bungalow
Photo by Dan Mayers
Article from artsandcraftshomes.com Read it

Most Homes Lack Character

Unless you own an older home your home probably lacks character unless you’ve added some.  My favorite way to add instant character and elegance to any space is by adding architectural elements like wide moldings, wainscotting, columns, architectural ceilings…

I absolutely love chunky white moldings, board and batten, beadboard, shiplap, any wainscoting!  They add such a classy look to any room and give loads of character! My favorite is board and batten. I even put it in my bathroom.

Board and batten in master bath
Board and batten in my master bath

 When painted white, it’s classic and works with most design styles and it’s so low cost!! You will get a big bang for your buck with my simple hack method for installing it.

White Room beadboard wainscotting with Blue Accents
Wide Beadboard
board and batten paneling in living room
Board and batten
bead board in breakfast room
Bead board wainscoting
Photo : Lowes.com
beadboard wainscoting for board and batten page
Bead board
Photo source: unknown
board and batten technique
Board and batten
Photo: chriskauffman.blogspot.com
shiplap on board and batten page
Shiplap
Photo: Decorpad.com
molding-shiplap-stylehouseinteriors
Shiplap
Photo: Style House Interiors.net

 

molding on ceiling for board and batten page
photo source unknown
molding
photo source unknown
crown molding
Photo source unknown

So What’s My Secret Board and Batten Hack?

This diy wainscoting board and batten technique is crazy simple! Are you ready???  Have you guessed it???  The secret is-you leave out the board and just nail the battens to your walls….and….you use inexpensive MDF(medium density fiberboard) instead of wood!

At the time of this installation I paid roughly $35 for a sheet of MDF and I only needed two 4×8 sheets.  Of course this technique needs to be painted and not stained and no one will know it’s not a full sheet of paneling but actually just sheet rock under the battens because it’s all painted out with a semi-gloss paint finish.  It’s really easy to do.  I did my whole living room by myself in one weekend.  Then I did my bathroom in a day!

board and batten technique
board and batten attached to walls-just battens
after pic of board and batten
After

Another of my tricks was having Home Depot do the majority of the cuts for me so I didn’t have to “rip” any boards.  That’s when you make long cut pieces (strips) from a big piece of whatever you start with…plywood…MDF.  Here it’s an 8’x4′ piece of mdf. (Call me Tool Belt Diva, lol. Anyone remember that show?).  You’ll need a lot of strips so unless you have a table saw and even if you do, I’d recommend having the big guys do it!

Make a Plan

You’ll have to measure your walls and do the math. It helped me to draw it all out on graph paper so I could maximize the 4×8 sheets of mdf with the amount of cuts I needed.  I used 2″x 44.5″ battens.  My existing base molding was 4″. I added a 5″ wide horizontal top piece which gave the wainscoting an overall height of 52″ in my living room.  I spaced the battens approximately 12″ apart.  In my bathroom I added a shelf to the top piece so I could use it for display and shortened the battens so the overall height was lower.  I also opted to not use the existing baseboard and replaced it with a 4″ base which I cut from the mdf.  You will need to use a nail gun which I borrowed from my generous neighbor. Caulk everything, sand, then paint in a semi-gloss.  Please contact me for more details if you need them.  Good luck, send me your pictures, would love to see them!

 

My Secret Board and Batten Hack
Tagged on:                         

4 thoughts on “My Secret Board and Batten Hack

  • September 10, 2016 at 9:59 am
    Permalink

    Very good article post.Really thank you! Awesome. Averette

    • September 10, 2016 at 4:08 pm
      Permalink

      Thanks so much Averette! Would love to see your project!

  • September 9, 2016 at 8:38 am
    Permalink

    I really liked your article.Really thank you! Awesome.

    • September 10, 2016 at 4:13 pm
      Permalink

      Thanks again!

Comments are closed.

Back To Top